Can I Put E85 in My Ford Explorer?

E85 is a high-octane, renewable fuel made from corn that can be used in any flex-fuel vehicle (FFV). There are three types of FFVs: those that run on gasoline only, those that can run on either gasoline or E85, and those that must use E85.

Your Ford Explorer is most likely the second type—an “all-wheel-drive” or AWD model—which means it can run on either type of fuel without damaging the engine.

However, you should check your owner’s manual to be sure, as some models may require special care when using E85.

  • If your Ford Explorer is a flex-fuel vehicle, you can fill it up with E85 gasoline
  • This fuel is made of 85 percent ethanol and 15 percent gasoline
  • It burns cleaner than regular gasoline and doesn’t require any special equipment to use
  • Here are the steps for filling your car up with E85: 1
  • Find a gas station that sells E85 fuel
  • Not all stations sell this type of fuel, so you may have to do some research to find a location near you
  • Pull up to the pump and insert your credit card or debit card into the reader
  • Select “E85” on the touch screen display or keypad
  • Fill up your tank as you would with regular gasoline
  • The pump will automatically shut off when your tank is full
  • Remove your card from the reader and replace the gas cap on your car

What Ford Vehicles Can Use E85?

E85 is a blend of 85% ethanol and 15% gasoline. It can be used in any vehicle that is designed to run on E85. This includes many Ford vehicles, such as the Crown Victoria, Taurus, Escape, Fusion, Mustang, and F-150.

Some other manufacturers also offer vehicles that can use E85, such as Chevrolet, Dodge, and Jeep.

What Happens If You Put E85 in a Regular Car?

If you try to use E85 fuel in a car that isn’t designed for it, you could end up doing some serious damage to your engine.

Related:   Can You Put 87 in a 5.7 Hemi?

E85 is a flex-fuel that can be used in cars that are specially made to run on it, but if your car isn’t designed for E85, then the engine might not be able to handle the high levels of ethanol and could overheat or even catch fire. So, if you’re not sure whether or not your car can run on E85, it’s best to play it safe and stick with regular gasoline.

What Type of Gas Does a Ford Explorer Use?

A Ford Explorer uses gasoline as its fuel. You’ll need to use unleaded gasoline with a octane rating of 87 or higher.

Can Ford Explorer St Use E85 Gas?

The Ford Explorer ST can use E85 gas. When using E85 gas, the engine produces less power and torque. The fuel economy is also lower when using E85 gas.

2003 Ford Explorer – Now on E85

2022 Ford Explorer Flex Fuel

The all-new Ford Explorer is now available as a flex fuel vehicle! This means that it can run on either gasoline or E85 ethanol. Ethanol is a renewable resource made from plant materials, so it’s a great way to reduce your carbon footprint.

The Explorer has a 3.5L Ecoboost engine that produces 365 horsepower and 380 lb-ft of torque. It’s paired with a 10-speed automatic transmission and comes standard with all-wheel drive. You can expect an EPA-estimated 19 MPG city/26 MPG highway/22 MPG combined when running on gasoline.

When using E85 ethanol, those numbers drop to 16 MPG city/23 MPG highway/19 MPG combined. So if you’re looking for a way to save some money at the pump and help the environment, the new Ford Explorer Flex Fuel is the perfect choice!

2022 Ford Explorer Fuel Type

The 2022 Ford Explorer will offer a choice of four different engines. The base engine will be a 2.3-liter turbocharged four-cylinder that produces 300 horsepower and 310 lb-ft of torque. This engine will be paired with a 10-speed automatic transmission.

The other three engine choices will all be V6s. There will be a 3.0-liter turbocharged V6 that makes 365 horsepower and 380 lb-ft of torque, a 3.3-liter naturally aspirated V6 that produces 290 horsepower and 255 lb-ft of torque, and a hybrid powertrain that consists of a 3.3-liter V6 and an electric motor that together produce 318 horsepower and322 lb-ft of torque. All three of these engines will also be paired with the 10-speed automatic transmission.

All versions of the Explorer will come standard with front-wheel drive, but all-wheel drive will be available as an option on all models except for the base four cylinder model which will only be offered with front wheel drive.

Related:   Can You Pass Emissions With High Flow Cats?

The all wheel drive system has been redesigned for the new model year and now features an electronically controlled limited slip differential that is integrated into the rear axle assembly instead of being housed in the transmission as it was in previous years.

This change should result in reduced mechanical noise, improved fuel economy, and reduced maintenance costs over the life of the vehicle..

Fuel economy figures have not yet been released by Ford, but they are expected to improve over the outgoing model thanks to the use of more lightweight materials throughout the body, including aluminum in certain body panels. A start/stop system that automatically shuts off the engine when it is idling should also help to improve fuel economy.

The 2022 Ford Explorer will go on sale in late 2021 or early 2022. Pricing has not yet been announced, but it is expected to start at around $33,000 for the base four cylinder model.

Ford Explorer Gas Type

The Ford Explorer is a sport utility vehicle that has been produced by the American automaker Ford Motor Company since 1990. The Explorer was introduced as a replacement for the Bronco II, and it was originally built on the Ranger pickup truck platform. The Explorer is currently in its fifth generation, and it is offered in both four-wheel drive and front-wheel drive configurations.

The first generation of the Ford Explorer was available with either a four-cylinder or six-cylinder engine, and it could be had with either two-wheel drive or four-wheel drive.

The second generation saw the introduction of an optional V8 engine, and this generation also marked the switch to a unibody construction. The third generation saw another redesign, this time with an emphasis on passenger comfort and safety.

This generation also marked the introduction of an optional third row of seating. The fourth generation of the Ford Explorer was introduced for the 2006 model year. This generation brought about another redesign, including a new chassis, new suspension, and an updated interior design.

A turbocharged four-cylinder engine became available for this generation, along with a more powerful V6 option. The fifth and current generation of the Ford Explorer was introduced for the 2011 model year. Notable changes for this generation include standard LED taillights, an available turbocharged EcoBoost V6 engine, and an updated infotainment system.

Related:   Are Torque Converter Bolts Reverse Thread?

Can I Use Unleaded 88 in My Ford Explorer

If you’re looking to put unleaded fuel in your Ford Explorer, you may be wondering if it’s the right move. Here’s what you need to know about using unleaded 88 in your Ford Explorer. Unleaded 88 is a type of gasoline that doesn’t contain lead.

Lead used to be added to gasoline to improve engine performance, but it’s now known to be harmful to the environment. That’s why unleaded gas is now the standard in most places. So, can you use unleaded 88 in your Ford Explorer?

Yes, you can! In fact, it’s recommended that you use unleaded gas in your Explorer (and all other vehicles). Unleaded gas is less harmful to the environment and will keep your engine running smoothly.


E85 is a fuel mixture of 85% ethanol and 15% gasoline. It can be used in flex-fuel vehicles, which are designed to run on either E85 or regular unleaded gasoline. However, you should not put E85 in a non-flex-fuel vehicle.

Doing so could damage the engine and void the warranty.

Scroll to Top