Can’t Get Key Out of Ignition Subaru?

It’s happened to all of us at one point or another. You’re ready to leave for work, school, or an errand and you go to turn off your car only to find that the key won’t budge from the ignition. For most people, this is a minor inconvenience.

But if it happens frequently, it can be frustrating and even dangerous. If you own a Subaru, there’s no need to worry. There are a few simple tricks that can help you get your key out of the ignition when it gets stuck.

If you’re having trouble getting your key out of the ignition of your Subaru, there are a few things you can try. First, make sure that the key is in the “run” position. If it’s not, the key may be stuck in the “start” position and you won’t be able to remove it.

Next, check to see if there’s any debris or dirt blocking the key from coming out. If so, gently remove it with a toothpick or other small object. Finally, if none of these solutions work, you may need to take your car to a dealership or mechanic to have them take a look at it.

Why Can’T I Pull My Key Out of My Ignition?

If your key won’t come out of the ignition, there are a few things that could be causing the problem. First, check to see if the steering wheel is locked. If it is, then you’ll need to unlock it before you can remove the key.

Another possibility is that the shift lever is not in the “Park” position. If it’s not, then the key won’t come out. Finally, there may be something interfering with the key itself, such as a piece of debris or a jammed lock cylinder.

If you can’t identify the cause of the problem, then it’s best to take your car to a qualified mechanic for diagnosis and repair.

Related:   Can You Mix Pink And Purple Coolant?

How Do You Take the Key Out of a Subaru?

Assuming you would like instructions on how to remove the key from a Subaru vehicle: To remove the key from a Subaru, locate the release button on the side of the steering column. The release button is typically silver and is located just above the ignition.

Once located, press and hold in the release button while simultaneously turning the key counterclockwise. The key should easily come out of the ignition once both actions have been completed.

How Do You Unlock a Subaru Ignition?

If your Subaru is equipped with an immobilizer system, the ignition key has a chip that sends a signal to the vehicle’s computer. This signal tells the computer to disable the fuel injectors and ignition system. In order to start the vehicle, you must have a programmed key that matches the immobilizer system.

If you do not have a programmed key, you can take your vehicle to a Subaru dealer and they can program a new key for you.

How To: Fix Subaru Key Stuck in Ignition – EZ FIX! ( Crosstrek Impreza Legacy Outback )

Can’T Get Key Out of Ignition Subaru Forester

If you’re having trouble getting your key out of the ignition of your Subaru Forester, there are a few things you can try. First, check to see if the key is inserted all the way. Sometimes the key can get stuck if it’s not fully inserted.

If that’s not the problem, then it’s possible that the ignition switch is dirty and needs to be cleaned. You can use a cotton swab or toothpick to clean out any dirt or debris that might be blocking the switch. If neither of these solutions works, then you may need to replace the ignition switch.

Related:   Can You Drive Without a Transmission Dipstick?

Subaru Key Stuck in Ignition Recall

Subaru has issued a recall for certain vehicles due to a problem with the ignition key getting stuck in the “on” position. This can happen if the key is inserted into the ignition and turned to the “on” position while at the same time, the shift lever is moved from the “park” position. If this occurs, it may be difficult to remove the key from the ignition and could result in an engine fire.

Affected models include: Forester • Impreza • Legacy • Outback • Tribeca If you have one of these vehicles, please contact your local Subaru dealer to have your vehicle repaired free of charge.

Key Stuck in Ignition Subaru Impreza

If your Subaru Impreza’s key gets stuck in the ignition, there are a few things you can do to try and fix the problem. First, check to see if the key is inserted all the way into the ignition. If it’s not, try wiggling it around until it seats properly.

If that doesn’t work, then you may need to replace the ignition switch.

Subaru Outback Key Stuck in Ignition Recall

The Subaru Outback is being recalled for a problem with the ignition key. The recall affects certain models from the 2010 and 2011 model years. According to the recall notice, “the affected vehicles may have been built with an incorrect key cylinder component that could allow the key to be removed from the ignition when the transmission is not in the ‘Park’ position.”

This could obviously lead to some serious safety problems, so if you own one of these vehicles, you should take it to a dealer as soon as possible to get it fixed.

Related:   Can You Use Hub Centric Rings With Spacers?

Conclusion

If you’re having trouble getting your key out of the ignition of your Subaru, don’t worry – you’re not alone. This is a common problem that can be caused by a few different things. First, make sure that the key is in the “run” position.

If it’s not, the key won’t come out. Next, check to see if there’s anything blocking the key from coming out. Sometimes dirt or debris can build up and prevent the key from being released.

Finally, if none of these solutions work, you may need to replace the ignition switch.

Scroll to Top